5 Do-It-Yourself Solutions to Common Plumbing Problems

To many homeowners, some plumbing problems do not need the services of a professional plumber. However, you will find that most of these homeowners are good with tools and can handle the work involved. Fortunately, there are a few issues that almost all homeowners can tackle on their own. Apart from eliminating the need to contact a plumbing company, solving such problems allows you to save some money. Below are five do-it-yourself solutions to common plumbing problems. You can find more information online. The Drain Rescue Plumbers website may be a good place to begin your research.

1. Tangled kitchen sink sprayer
If you have to wiggle the hose when pulling out your kitchen sink sprayer, here’s a simple hack to ensure smooth operation. You’ll need ½-inch foam pipe insulation and duct tape. Slip the foam insulation over the shut-off handles and pipes under your kitchen sink. Although you can use the duct tape to wrap them together, plastic ties are more permanent.

2. Banging pipe
Pipes often bang when a valve or faucet is cut off suddenly. The sudden stop keeps water from compressing. Aside from the constant irritation, it can damage your pipes. You can prevent this by installing air chambers or shock absorbers into your water supply lines at each fixture. The inert gas and bellows will absorb the shock, which is why installing these manufactured products is better than using a foot long copper pipe.

3. Leaky pipe connections
If your pipes leak where they connect, try the pipe thread plumbing trick before you call a plumber. To complete this simple and pocket-friendly hack, you’ll need a bucket and tape. Turn off the main water supply first. Since there will be some water left over in the pipes after you turn off the main valves, you can avoid a huge mess by placing a bucket under the affected connection. Loosen the pipes at their threads with a monkey wrench and disconnect them temporarily. Wrap some tape around the threads in a clockwise motion and reconnect the pipes. The two pieces will have a much firmer grip, one that won’t spring a leak.

4. Clogged toilet
Although clearing a clogged toilet might be a bummer, not being able to use your toilet because it’s clogged is more stressful. A clogged toilet is one of the main reasons why many homeowners seek professional drain repair services. Every home needs a plunger, preferably one with a narrow flange at the end. This type will fit right into the snake pipe. You’ll probably have an overflow issue if you flush a clogged toilet. Give the water level time to reduce before you go in with the plunger and have something absorbent on hand to be on the safe side. The bell will most likely be full of air. Plunging gently releases the air pocket slowly. Thrusting hard might force air back around the seal, which will blow water all over. Plunge vigorously once you’ve released the air. Remember to maintain the seal and keep the plunger covered. This movement will loosen the clog by causing water to move in every direction. Repeat this easy hack if necessary.

5. Leaky faucet
You can fix a leaky faucet by replacing the circular rubber disc found inside the fixture. But before you replace the washer, tighten the faucet at the base and check to see if it stops leaking. If these easy hacks don’t work, the problem could be with the faucet itself, in which case you will need a new one. Getting the right fixture for your home might not be as easy as it seems since faucets come in different sizes. Seeking the assistance of a professional plumber is a good idea. Alternatively, you can remove the fixture and take it along for reference, which could mean shutting off your main water supply or the valve that services that particular line.

The easy tips listed above should keep your plumbing operations smooth and help prevent emergencies. Contact a plumbing company if the problem persists.

Leave a Reply

Your email address will not be published. Required fields are marked *